French Vanilla Glaze RTA Kitchen Cabinets
Ships in 2-7 Business
Days*These cabinets ship ready to assemble*



Style • Features
- All wood cabinetry
- Solid wood drawer and door fronts
- Solid wood drawer boxes
- Plywood box construction
- Concealed hinges
- Full Extension Dovetailed Drawers
- Soft Closing Drawer Glides
- Face Frame Width is 1.5"
- All panels/skins (Wall/Base End Panels, Island Panels, Refrigerator
Panels, Dishwasher Panels, Plywood Panels, etc.) have unfinished edges
- From the top and bottom of the door to the edge of the face
frame is 1/4", from the sides of the door to the edge of the face frame is 1/8"
RTA French Vanilla Glaze Specifications
| Wood Species | Maple |
| Face Frame | 3/4" Solid Maple |
| Door & DR Front | Solid Maple |
| Door Style | Raised Panel |
| Overlay | Full |
| Side & Top/Bottom | 1/2" Plywood with Maple Veneer |
| Back Panel | 1/2" Plywood |
| Shelves | 5/8" Plywood |
| Hinges | Concealed |
| Drawer Box | Full Extension Dovetailed Drawers |
| Drawer Glides | Undermount |
**All single door cabinets will be hinged to the right. This can be
switched to the left during assembly by rotating base cabinet doors and
drilling holes for the hinges on the left side of the face frame. The
holes on the right side can then be filled with the touch up crayon
available under Cabinet Accessories. For wall cabinets, just rotate the
face frame and door.**
Note: The
full-overlay door style leaves about an 1/8" clearance on the edge. To
make sure cabinet doors mounted against a wall open properly, a 1/2"
clearance is recommended. This is only if there is a wall to the left or
right of a cabinet (not in between every wall cabinet). If the space is
really tight and there isn't a 1/2" to work with, it is also ok to use a
piece of scribe which adds a 1/4" for a total clearance of 3/8". Only
choose that option if the design doesn't allow for a 1/2" clearance.