Sonoma Merlot Kitchen Cabinets

Ready to Assemble Cabinets

We offer two types of kitchen cabinets, Ready to Assemble (RTA) and Pre-Assembled. RTA cabinets are generally priced 30-70% lower than at a big box store. They are all solid wood and plywood cabinetry with no particle board. These cabinets ship flat packed and are ready to assemble! There are over 40 finishes to choose from! All assembly instructions can be seen by clicking on the Assembly Instructions link below.

Pre-Assembled Cabinets

Pre-Assembled cabinets have the same great specifications as RTA cabinets, (some even better) but are shipped assembled and ready to install. There are over 30 finishes to choose from!

Shop Bathroom Vanities

Most of our Ready to Assemble and Pre-Assembled kitchen cabinet finishes come with the matching bathroom vanity cabinets also which makes coordinating your kitchen and bathroom very simple! Our vanities are offered in either RTA or Pre-Assembled and are priced hundreds less than most other vanity websites on the internet. You can also take a look at our sister site https://www.BathroomVanitiesForLess.com to see all the great vanities we offer on this site and more!

You are here: Home > Ready To Assemble Kitchen Cabinets > Sonoma Merlot

Wall Cabinets	Base Cabinets
Wall Pantry Cabinets	Oven Kitchen Cabinets
Cabinet Accessories	Bathroom Vanities
Buy a Sample Door

Sonoma Merlot RTA Kitchen Cabinets

Ships in 2-10 Business Days

*These cabinets ship ready to assemble*

Style • Features

Solid American Maple
Full Overlay, Butt Door
Interior Matches the Door Style
Upgraded Soft Close Hinges Available
No Center Stile on Cabinetry 24"W-36"W
Dove Tail Drawer Box
Base Cabinet Shelves are 1/2" Depth
Refrigerator Panels and Décor Panels (Product Codes: EPB, EPW and EPWP) have finished edges. Dishwasher Panels will only be finished on the edge with the return. Back Panels and Bead Board Panels (Produce Codes: FBP and BP) have unfinished edges
Measurement from the top of the door to the edge of the face frame is 1/2"
*Single door cabinets will be hinged to the right be default but can be switched to the left upon assembly. For Wall Cabinets, the face frame can be flipped. For Base Cabinets unhinge the door, flip it, screw holes on the opposite side to re-hinge, and then fill the original holes (the touch up kit under Accessories can be used for this)*

RTA Sonoma Merlot Specifications

Wall & Base	Raise Square
Front Frame	3/4" Solid American Maple
Door Frame	3/4" Solid American Maple
Door Center	Solid American Maple
Sides & Bottom	1/2" A-Grade Plywood with Maple/Birch Wood Veneer
Back Panel	Full Back on Bases, 1/2" Plywood
Hinges	Concealed 6-Way Adjustable
Connectors	Pre-Installed, Color Coated Metal Clip, Will Not Tarnish
Shelves	3/4" A-Grade Plywood with Wood Veneer
Drawer Box	Solid Wood 17mm (Close to 3/4"), Drawer Bottom 1/2" Plywood, Drawer Length 21", Pre- Assembled Dove Tail Drawer Box, Natural Finish
Drawer Glides	Undermount, Full Extension with Soft Closing Feature

The full-overlay door style leaves about an 1/4" clearance on the edge. Depending on the decorative hardware being installed, a narrow clearance (usually 1/2" is sufficient, but may need to be larger depending on hardware style) may be necessary to make sure cabinet doors mounted against a wall open properly. This is only if there is a wall to the left or right of a cabinet (not in between every wall cabinet). A space may not be needed, but just be aware it may be necessary depending on the decorative hardware is being used.

The RTA Store