Free KitchenDesign
Fill out the form below and one of our designers will contact you asap!
  • Reload captcha

Success! One of our designers will be in touch very soon!

CLOSE

Registration

Profile Information

Login Data

 
First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

Cathedral Oak - Welcome to our Volume Ordering Page

Cathedral Oak Kitchen

Specs
Shipping Time: Ships in 7-14 business days
Style: Cathedral Raised Panel
Face Frame: 3/4” Solid White Oak
Door Frame: 3/4” Veneer Oak 
Door Center: 3/4” Veneer Oak
Sides: 1/2" Plywood
Top & Bottom (Wall): 1/2" Plywood
Bottom (Base): 1/2" Plywood
Back Panel: 1/8" + 3/8" Edge-round plywood (Vanity and sink base cabinets will have open backs except where glides are attached)
Shelves: 5/8" Plywood
Base Cabinet Shelf Depth: 1/2
Drawer Box:

1/2" Plywood

Drawer Glides: Side Mount
Base Corner Supports: Plastic corner brackets
Overlay: Half
Hinges: Exposed Antique Brass
Cabinet Interior: Matches door finish
Center Stile:

24" and wider will have a fixed center stile (in the middle of the face frame)

Assembly Method: Cam Lock
Finish: Polyurethane Finish (4 Coats)
Toe Kick: 1/2" Plywood
Installation Rail: 3/4" Solid Wood (top and bottom of wall cabinets) 
Wall Cabinet Bottoms Finished (Exterior): Yes
CARB Compliant: Yes
Door Hinges: Can Be Assembled On The Left Or Right Side, Frames Are Drilled On Both Sides
Toe Kicks Included w/Base Cabinets: Yes
Sides Panels Finished: Yes
About

This finish ships in 7-14 business days


Accident Protection Warranty For Your Entire Kitchen! Learn More!


The Cathedral Oak cabinet collection offers a well-crafted yet extremely affordable kitchen. The Cathedral Oak cabinets have a beautiful roman-arched raised door style made with solid oak wood. You won’t find a better quality cabinet for the price that Cathedral Oak offers. Please note additional shipping charges will apply if purchasing large cabinets, panels, vanity tops or some types of glass cabinets alone, or without at least 5 other cabinets - click here to see more information about shipping charges.

Cabinet Terms
Still have questions? Email us at info@thertastore.com today!
Ball Bearing Glides - Smooth gliding guides that are usually side mounted. These guides slide on small metallic balls that bear the weight of the drawer.
Butt Doors - Door on a double door cabinet that when closed, nearly touch each other. Typically, a 1/8" gap is allowed between the butt doors.
Cam Locks - A cylindrical lock or fastener commonly used for cabinets. Often there will be a male and female part. Once inserted, simply turn the metal piece 180 degrees clockwise to lock into place. Cam locks are an easy and secure way to connect cabinet panels. They are commonly found in ready-to-assemble cabinets.
Center Stile - Vertical strips of wood that divide cabinets for extra support and durability. Usually seen on larger width cabinets.
Concealed hinge - a hinge that is not visible on the front of a cabinet door. Concealed hinges are attached to the inside surface of the door.
Dado - a groove that is cut into a piece of material so that another piece may slide into it. The inside surface of cabinet drawers may be 'dadoed' with a groove to accept the drawer bottom panel which helps make for a stronger joint between the drawer side and bottom panels.
Dovetail - Woodworked joints that are used to connect drawer sides to the drawer face without the use of exposed hardware. These joints are known for their durability. The wood is cut in a series of angled portions that look like dove tails. These “tails” interlock and are difficult to separate once attached.
Epoxy Coated Glides - A fast drying white protective coating that is baked into hardware metal guides. It is low VOC and can be used for sidemount and undermount hardware.
Exposed hinge - a hinge type that is visible on the outside edge of the cabinet door when the door is closed.
Face frame - the wood frame that is attached to the front edges of the top, bottom and sides of the cabinet box. The door gets hinged to the face frame. This frame helps provide rigidity to the box. Cabinet designs that incorporate this feature are called "framed" or "face-frame" cabinets.
Framed - a cabinet design that uses a 'face-frame' which is typically a wood frame attached to the front edges of the cabinet box (where the door gets hinged to).
Frameless - a cabinet design that does not use a frame on the front outside edges of the cabinet box. The front of the cabinet box is formed by the edges of the top, bottom and side panels of the cabinet box. The cabinet door typically covers these edges when closed.
Full Extension Glides - Hardware that provides full-access to drawers and allows the drawer to pass the face frame.
Full Overlay - A cabinet design whereby the cabinet door or drawer front covers the entire face frame so that only the cabinet door is seen with no part of the face frame visible. A cabinet is also considered full-overlay when the reveal is less than ¼ inch.
Half Overlay/Partial Overlay - A cabinet design whereby the cabinet door or drawer front partially overlaps the face frame. When the drawers/doors are closed, more than ¼ inch of the face frame remains visible.
Inset - a cabinet design whereby the doors fit inside of the face frame when closed (rather than overlapping and sitting on top of the face frame).
Medium density fiberboard (MDF) - a wood-based product that's produced by the combination of very small wood fibers and a glue, resin or similar bonding agent. MDF can be more easily shaped than products like particle board due to the consistency of the material formed by the small fibers. MDF can be used for shelves, doors (typically painted or covered with melamine) and other cabinet parts. It is very dense and resists warping. It is commonly seen in the center panels of recessed cabinet door styles (like a Shaker door) to prevent warping and cracking of the center panel during the wood’s natural expansion and contraction throughout the year.
Melamine - a durable plastic, similar to laminate that can be applied to certain areas of cabinets. It is easy to clean and resists stains, chipping and fading.
Miter - A woodworking joint where two beveled pieces adjoin to make a 90 degree angle.
Mortise and Tenon - a means of wood joinery that involves part of one piece being inserted into a notch or hole in the mating piece. A typical mortise and tenon joint has a square protrusion coming off the end of one piece that fits tightly into a square 'hole' or notch in the piece it's joined to. The pieces that make up the outer frame of a cabinet door might be joined using this technique.
Overlay - Overlay refers to the amount of face frame that is covered by the cabinet door or drawer front.
Partial overlay/Half Overlay - A cabinet design whereby the cabinet door or drawer front partially overlaps the face frame. When the drawers/doors are closed, more than ¼ inch of the face frame remains visible.
Particle board - a wood product made up of very small wood pieces and fragments that are fused together with a glue or resin under mechanical pressure.
Plywood - an all wood product made up of several layers of wood with the grain direction running at different angles with respect to each other. This orientation gives plywood greater strength and stability in comparison to solid wood. It reduces the tendency of wood to split when nailed at the edges and reduces expansion and shrinkage, providing improved dimensional stability.
Rail - the horizontal pieces of a face frame or door frame (in contrast to a "stile" which is the vertical member of the frame).
Raised Panel - Doors that have slightly raised center panels.
Recessed Panel - Door style where the center panel is inset or recessed. A common example is a Shaker door style.
Reveal - The exposed portion between the end of the cabinet face frame and the door.
Self Closing Drawers - Drawers that have mechanisms or magnets that guide the drawer closed. These are not soft-closing.
Sidemounted Glides - Drawer hardware that is mounted on the side of the drawer.
Slab Front - A flat door panel with no design, moldings, recessed or raised areas. Commonly gives a more contemporary appearance.
Soft Close Drawers - Drawers containing a piston that respond to various levels of pressure and weight, absorbing the impact and closing the door slowly and safely.
Stile - the vertical pieces of a face frame or door frame (in contrast to the "rails" which are the horizontal pieces of the frame).
Undermount Glides - Drawer hardware that is mounted underneath the drawer. Undermount guides can usually carry more weight than sidemount guides.
Veneer - thin layers of wood applied to plywood or MDF before it’s treated with stain. Veneers can be used on the sides of exposed cabinets (for example, on the end of a run of cabinets) and on the interior surfaces of cabinet boxes.
Assembly
SKU NAME
GW0930 GH WO930 OAK
GW1230 GH W1230 OAK
GW1530 GH W1530 OAK
GW1830 GH W1830 OAK
GW2130 GH W2130 OAK
GW2430 GH W2430 OAK
GW2730 GH W2730 OAK
GW3030 GH W3030 OAK
GW3330 GH W3330 OAK
GW3630 GH W3630 OAK
GW4230 GH W4230 OAK
GW6030 GH W6030 OAK
GWBC2730 GH WBC2730 OAK
GWDC2430 GH WDC2430 OAK
GW3012 GH W3012 OAK
GW3612 GH W3612 OAK
GW2415 GH W2415 OAK
GW3015 GH W3015 OAK
GW3315 GH W3315 OAK
GW3615 GH W3615 OAK
GW3018 GH W3018 OAK
GW3024 GH W3024 OAK
GW3624 GH W3624 OAK
GW301224 GH W301224 OAK
GW331224 GH W331224 OAK
GW331524 GH W331524 OAK
GW361524 GH W361524 OAK
GW332424 GH W332424 OAK
GW362424 GH W362424 OAK
GW0942 GH W0942 OAK
GW1242 GH W1242 OAK
GW1542 GH W1542 OAK
GW1842 GH W1842 OAK
GW2142 GH W2142 OAK
GW2442 GH W2442 OAK
GW2742 GH W2742 OAK
GW3042 GH W3042 OAK
GW3342 GH W3342 OAK
GW3642 GH W3642 OAK
GW4242 GH W4242 OAK
GWDC2442 GH WDC2442 OAK
GWDC2742 GH WDC2742 OAK
GB09 GH B09-FH (FULL HEIGHT) OAK 
GB12 GH B12 OAK
GB15 GH B15  OAK
GB18 GH B18 OAK
GB21 GH B21 OAK
GB24 GH B24 OAK
GB27 GH B27 OAK
GB30 GH B30 OAK
GB33 GH B33 OAK
GB36 GH B36 OAK
GB42 GH B42 OAK
GBBC42-45 GH BBC42-45 Oak
GDB15 GH DB15 OAK
GDB18 GH DB18 OAK
GDB21 GH DB21 OAK
GDB30 GH DB30 OAK
GDCB3612 GH DCB3612 OAK
GBC24 GH BC24 OAK
GSB30 GH SB30 OAK
GSB33 GH SB33 OAK
GSB36 GH SB36 OAK
GSB42 GH SB42 OAK
GSB60 GH SB60 OAK
GWP1884 GH WP1884 OAK
GWP2484 GH WP2484 OAK
GWP1896 GH WP1896 OAK
GWP2496 GH WP2496 OAK
GOU302484 GH OU302484 OAK
GOU332484 GH OU332484 OAK
GTK8 GH TK8 OAK
GCM8 GH CM8 OAK
GLRM7 GH LRM7 OAK
GOSC7 GH OSC7 OAK
GSCM7 GH SCM7 OAK
GVA48 GH VA48 OAK STRAIGHT VALANCE
GVAS48 GH VAS48 OAK SCALLOPED VALANCE
GF330 GH F330 OAK
GF642 GH F642 OAK
GBF3 GH BF3 OAK
GBEP3LT GH BEP3LT OAK
GEP24X35 GH OAK END PANEL 24X35X3/16"
GWEP12X42 GH WALL END PANEL 12X42X3/16"
G3X4PAN GH 3x4x1/4" ISLAND PANEL
GRP84 GH RP84 REFRIGERATOR PANEL OAK
GRP96 GH RP96 REFRIGERATOR PANEL
GMC3018 GH MC3018 OAK
GPR3015 GH W3015 PLATE RACK OAK
GWR3015 GH WR3015 WINE RACK OAK
GSGH30 GH SGH30 STEM GLS HOLD OAK
G1530MD GH 1530 MULLION DOOR OAK
G1830MD GH 1830 MULLION DOOR OAK
GDC2430MD GH DC2430 MULLION DOOR OAK
G1542MD GH 1542 MULLION DOOR OAK
G1842MD GH 1842 MULLION DOOR OAK
GDC2442MD GH DC2442 MULLION DOOR OAK
GDC2742MD GH DC2742 MULLION DOOR OAK
GCSF36 GH CSF36 OAK
G30DD GH 30" DECO DOOR OAK
G42DD GH 42" DECO DOOR OAK
GBDD GH BASE DECO DOOR OAK
GRD18 GH RD18 OAK - 4/BOX
GRD24 GH RD24 OAK - 4/BOX
GWP1884SHELF GH WP1884 SHELF KITS - 4/BOX
GWP2484SHELF GH WP2484 SHELF KITS-4/BOX
Close

What is 10x10 Pricing?

A 10x10 kitchen is a standard kitchen in size, it is a total of 20 feet of wall space. 10x10 pricing is a common method used by kitchen cabinet retailers to help customers gauge which cabinets cost less and which cost more. The cabinets used in our 10x10 pricing are the least expensive options for each finish as this is to be used as a starting point to what you would get if your kitchen was 10x10 and you used the least expensive options available in that particular finish.

For more information please click here.