Let us turn your dream into a reality!
CARB stands for California Air Resources Board, also known as Air Resources Board (ARB). It is a department of the California Environmental Protection Agency. It was established in 1967 with the purpose of maintaining and improving air quality, and researching causes and solutions of air pollution. CARB's mandates, such as CARB 2 compliant MDF, are strict and usually are considered the standard across the United States.
What is CARB Phase 2 Compliant?
CARB Phase 1 and Phase 2 are a part of California's Composite Wood Products Regulation (CWP Regulation), which took effect in 2009 with Phase 1. The regulation has to do with reducing formaldehyde emissions from composite wood products, hardwood plywood, particleboard and medium density fiberboard (MDF). In the 2009 rollout of the CARB's Airborne Toxic Control Measure (ATCM), formaldehyde emissions were capped at .08 parts per million (ppm). CARB Phase 2 went into effect in 2010 and has much lower formaldehyde emissions than the previous phase; set at .05 ppm. A main reason why the CARB ATCM is the strictest air quality measure is because it CAPS emissions levels. Other air quality standards are averages.
Phoenix Caramel Glaze - Out of stock through August
This finish ships in 10 to 20 Business days
The Phoenix Caramel Glaze collection offers a warm and elegant ambiance to any Bar Room Cabinetry space. The rich coffee tones create a welcoming feel that will have your guests feeling right at-home! With an abundance of decorative features to choose from you will surely have the look of a custom Bar Room Cabinetry without breaking the bank!
|Shipping Time:||Ships in 10 to 20 Business days - Out of stock through August|
|Face Frame:||3/4" x 1-1/2" solid wood|
|Door Frame:||Solid maple|
|Door Center:||Solid maple|
|Top & Bottom (Wall):||1/2" plywood|
|Bottom (Base):||1/2" plywood|
|Back Panel:||3" wide x 3/4" thick picture frame back with 1/4" plywood center|
|Shelves:||3/4" plywood, adjustable, metal shelf rests|
|Base Cabinet Shelf Depth:||18"|
|Drawer Box:||Dovetail drawer boxes, 1/2" thick solid wood side panels. 3/8" thick plywood bottom|
|Drawer Glides:||Full extension, soft closing, undermount glides|
|Base Corner Supports:||Metal bracket reinforced corners|
|Cabinet Interior:||Clear coated natural maple interior|
|Finish:||Polyurethane UV Resistant Finish w/Glaze|
|Toe Kick:||1/2" thick, edge banded|
|Installation Rail:||3/4" thick x 1-1/2" wide|
|Door Hinges:||Doors can be flipped for a left or right assembly|
|Side Panels Finished:||Yes|
Scribe needs to be used for a wall cabinet against a wall or deeper cabinet/appliance. For base cabinets, a 1/2" space needs to be left (which can be filled with a filler that is cut to size).
The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth.
Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards*
Schematic images are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above.
Please click here to download assembly instructions