CARB stands for California Air Resources Board, also known as Air Resources Board (ARB). It is a department of the California Environmental Protection Agency. It was established in 1967 with the purpose of maintaining and improving air quality, and researching causes and solutions of air pollution. CARB's mandates, such as CARB 2 compliant MDF, are strict and usually are considered the standard across the United States.
What is CARB Phase 2 Compliant?
CARB Phase 1 and Phase 2 are a part of California's Composite Wood Products Regulation (CWP Regulation), which took effect in 2009 with Phase 1. The regulation has to do with reducing formaldehyde emissions from composite wood products, hardwood plywood, particleboard and medium density fiberboard (MDF). In the 2009 rollout of the CARB's Airborne Toxic Control Measure (ATCM), formaldehyde emissions were capped at .08 parts per million (ppm). CARB Phase 2 went into effect in 2010 and has much lower formaldehyde emissions than the previous phase; set at .05 ppm. A main reason why the CARB ATCM is the strictest air quality measure is because it CAPS emissions levels. Other air quality standards are averages.
Farmhouse Walnut Shaker
This finish ships in 3-10 business days
Accident Protection Warranty For Your Entire Office! Learn More!
The Farmhouse Walnut Shaker cabinet collection stands as a testament to the artistry of woodworking, showcasing a distinctive blend of classic Shaker design and the rich allure of a medium to dark rustic finish. Each cabinet in this collection is a masterpiece, meticulously crafted to capture the unique qualities of the wood, known for its depth and character. The deep, rich brown stain enhances the natural grain patterns, creating a luxurious and timeless aesthetic that effortlessly complements farmhouse-inspired interiors.
Shipping Time: |
Ships in 3-10 business days |
Matching Collections: | |
Style: | Shaker |
Face Frame: | 3/4" x 1-1/2" Solid wood |
Door Frame: | 3/4" x 2-1/4" Solid birch wood |
Door Center: | 1/4" HDF with wood veneer |
Door Frame Width: | 2.25" |
Center Panel Beveled Edge: | Yes |
Sides: | 1/2" Plywood |
Top & Bottom (Wall): | 1/2" Plywood |
Bottom (Base): | 3/8"Plywood |
Back Panel: | 1/2" Plywood *sink base and vanity sink base cabinets will not have full backs, vanity sink bases with drawers will only have a full back behind the drawer section(s)* |
Shelves: | 3/4" Plywood shelves, edge banded |
Base Cabinet Shelf Depth: | 10-1/2" |
Drawer Box: | 3/4" solid hardwood, 3/8" plywood bottom, dovetailed |
Drawer Glides: | Full extension, undermount, soft-close glides |
Drawer Fronts: | Solid birch, slab drawer fronts |
Base Corner Supports: | High impact, injection molded plastic |
Overlay: | Full |
Hinges: | 6-way adjustable, soft-close, concealed hinges, 110 degree opening |
Cabinet Interior: | Natural |
Center Stile: |
None unless otherwisenoted |
Assembly Method: | Cam lock |
Finish: | Polyurethane, UV resistant top coat with an oil based stain |
Toe Kick: | 1/2" Plywood |
Installation Rail: | 3/4" x 1-1/4" hardwood |
Wall Cabinet Bottoms Finished (Exterior): | Yes |
CARB Compliant: | Yes |
Door Hinges: | Hinged right by default, base cabinet doors can be switched, but new holes may have to be drilled. Wall cabinet doors can be flipped. |
Toe Kicks Included w/Base Cabinets: | Yes |
Sides Panels Finished: | Yes |
Installation/Designer Note: |
The full-overlay door style leaves roughly a 1/4" clearance on the edge. If installed directly against a wall or deeper cabinet and a cabinet door opening of at least 90 degrees is desired, scribe molding should be installed between the cabinet and the wall (or deeper cabinet). If not, the door may not be able to open a full 90 degrees. For a full opening, a space of at least 1/4-1/2" is necessary, a larger space may be needed depending on the decorative hardware used on the cabinets. The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards* Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specificationsforthis collection can be found in theconstruction detailslisted above. |
Accessories
How to Install Molding
Drawer Glide
Blumotion Soft Close Hinge Adapters
Roll Out Tray
Base Cabinets
Single Door Base Cabinets: 09" - 21"
Double Door Base Cabinets: 24" - 30"
Double Door Base Cabinets: 33" - 48"
Blind Base Cabinet
Drawer Base Cabinet
Diagonal Corner Base Cabinet
Sink Base Cabinets: 24" - 30"
Sink Base Cabinets: 33" - 48"
Sink Base Cabinets: 60"
Wall Cabinets
Wall Cabinets: 09x30 - 21x30
Wall Cabinets: 09x42 - 21x42
Wall Cabinets: 24x12 - 36x12
Wall Cabinets: 24x30 - 48x30
Wall Cabinets: 24x42 - 48x42
Wall Cabinets: 30x15 - 30x18 (Plate Rack)
Wall Cabinets: 30x15 - 30x18 (Wine Rack)
Wall Blind Corner Cabinet: 24x30 - 36x30
Wall Blind Corner Cabinet: 24x42 - 36x42
Wall Diagonal Corner Cabinet: 24x30 - 27x30
Wall Diagonal Corner Cabinet: 24x42 - 27x42
Microwave Cabinet
Pantry Cabinets
Wall Pantry Cabinets: 18x84 - 18x96
Wall Pantry Cabinets: 24x84 - 24x96
Oven Cabinets
Oven Cabinet: 33x24x84 - 33x24x96
Oven Cabinet: 30x84 - 33x96
-
View All
-
Sample Door
-
30” High Wall Cabinets
-
36” High Wall Cabinets
-
42” High Wall Cabinets
-
12" Deep Small Wall Cabinets
-
24" Deep Small Wall Cabinets
-
Corner and Blind Wall Cabinets
-
Wall Cabinets With Drawers
-
Wall End Shelf Cabinets
-
Wall Angle Cabinets
-
Wall Specialty Cabinets
-
Hoods
-
Wall Cabinet Hanging Kit
-
Microwave Wall Cabinet
Please note that all cabinet images are to show the final product, but assembly will be required.
-
View All
-
Single Door Base Cabinets
-
Double Door Base Cabinets
-
Drawer Base Cabinets
-
Corner and Blind Base Cabinets
-
Sink Base Cabinets
-
Microwave Base Cabinet
-
Transition and Angle Base Cabinets
-
Base Pull Out Spice Cabinets
-
Base Trash Cabinet Accessories
-
Angle Base Cabinet
Please note that all cabinet images are to show the final product, but assembly will be required.
-
View All
-
Oven Cabinets
-
Pantry Cabinets
Please note that all cabinet images are to show the final product, but assembly will be required.
-
View All
-
Fillers
-
Fillers and Columns
-
Fluted Fillers
-
Moldings and Toe Kick
-
Panels
-
Decorative Doors
-
Valances
-
Roll Out Trays
-
Decorative Accent Pieces
-
Glass Doors
-
Recommended Decorative Hardware
-
Mullion Glass Doors
-
Spice Rack Pullout
-
Touch Up
-
View All
-
Filler Pull-Out Organizers
-
Base Trash Cabinet Accessories
-
Sink Base Tilt Out Trays
-
Inside Drawer Accessories
-
Inside Door Accessories
-
Inside Cabinet Accessories