Need help? Call us: 877-992-2246
Free KitchenDesign
Cart
CLOSE

Registration

Profile Information

Login Data

 
First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

Biltmore Vanilla

CARB2

CARB stands for California Air Resources Board, also known as Air Resources Board (ARB). It is a department of the California Environmental Protection Agency. It was established in 1967 with the purpose of maintaining and improving air quality, and researching causes and solutions of air pollution. CARB's mandates, such as CARB 2 compliant MDF, are strict and usually are considered the standard across the United States.

What is CARB Phase 2 Compliant?

CARB Phase 1 and Phase 2 are a part of California's Composite Wood Products Regulation (CWP Regulation), which took effect in 2009 with Phase 1. The regulation has to do with reducing formaldehyde emissions from composite wood products, hardwood plywood, particleboard and medium density fiberboard (MDF). In the 2009 rollout of the CARB's Airborne Toxic Control Measure (ATCM), formaldehyde emissions were capped at .08 parts per million (ppm). CARB Phase 2 went into effect in 2010 and has much lower formaldehyde emissions than the previous phase; set at .05 ppm. A main reason why the CARB ATCM is the strictest air quality measure is because it CAPS emissions levels. Other air quality standards are averages.

More Views

Specs
About

This finish ships in 7-14 business days


Accident Protection Warranty For Your Entire Kitchen! Learn More!


The Palisades White collection will brighten up any home with its bright and cheerful white finish. It's raised door panel design is a classic look that will match any style of home and the all plywood box construction ensures you're getting high quality cabinets which will last for decades.

Cabinet Terms
Still have questions? Email us at info@thertastore.com today!
Ball Bearing Glides - Smooth gliding guides that are usually side mounted. These guides slide on small metallic balls that bear the weight of the drawer.
Butt Doors - Door on a double door cabinet that when closed, nearly touch each other. Typically, a 1/8" gap is allowed between the butt doors.
Cam Locks - A cylindrical lock or fastener commonly used for cabinets. Often there will be a male and female part. Once inserted, simply turn the metal piece 180 degrees clockwise to lock into place. Cam locks are an easy and secure way to connect cabinet panels. They are commonly found in ready-to-assemble cabinets.
Center Stile - Vertical strips of wood that divide cabinets for extra support and durability. Usually seen on larger width cabinets.
Concealed hinge - a hinge that is not visible on the front of a cabinet door. Concealed hinges are attached to the inside surface of the door.
Dado - a groove that is cut into a piece of material so that another piece may slide into it. The inside surface of cabinet drawers may be 'dadoed' with a groove to accept the drawer bottom panel which helps make for a stronger joint between the drawer side and bottom panels.
Dovetail - Woodworked joints that are used to connect drawer sides to the drawer face without the use of exposed hardware. These joints are known for their durability. The wood is cut in a series of angled portions that look like dove tails. These “tails” interlock and are difficult to separate once attached.
Epoxy Coated Glides - A fast drying white protective coating that is baked into hardware metal guides. It is low VOC and can be used for sidemount and undermount hardware.
Exposed hinge - a hinge type that is visible on the outside edge of the cabinet door when the door is closed.
Face frame - the wood frame that is attached to the front edges of the top, bottom and sides of the cabinet box. The door gets hinged to the face frame. This frame helps provide rigidity to the box. Cabinet designs that incorporate this feature are called "framed" or "face-frame" cabinets.
Framed - a cabinet design that uses a 'face-frame' which is typically a wood frame attached to the front edges of the cabinet box (where the door gets hinged to).
Frameless - a cabinet design that does not use a frame on the front outside edges of the cabinet box. The front of the cabinet box is formed by the edges of the top, bottom and side panels of the cabinet box. The cabinet door typically covers these edges when closed.
Full Extension Glides - Hardware that provides full-access to drawers and allows the drawer to pass the face frame.
Full Overlay - A cabinet design whereby the cabinet door or drawer front covers the entire face frame so that only the cabinet door is seen with no part of the face frame visible. A cabinet is also considered full-overlay when the reveal is less than ¼ inch.
Half Overlay/Partial Overlay - A cabinet design whereby the cabinet door or drawer front partially overlaps the face frame. When the drawers/doors are closed, more than ¼ inch of the face frame remains visible.
Inset - a cabinet design whereby the doors fit inside of the face frame when closed (rather than overlapping and sitting on top of the face frame).
Medium density fiberboard (MDF) - a wood-based product that's produced by the combination of very small wood fibers and a glue, resin or similar bonding agent. MDF can be more easily shaped than products like particle board due to the consistency of the material formed by the small fibers. MDF can be used for shelves, doors (typically painted or covered with melamine) and other cabinet parts. It is very dense and resists warping. It is commonly seen in the center panels of recessed cabinet door styles (like a Shaker door) to prevent warping and cracking of the center panel during the wood’s natural expansion and contraction throughout the year.
Melamine - a durable plastic, similar to laminate that can be applied to certain areas of cabinets. It is easy to clean and resists stains, chipping and fading.
Miter - A woodworking joint where two beveled pieces adjoin to make a 90 degree angle.
Mortise and Tenon - a means of wood joinery that involves part of one piece being inserted into a notch or hole in the mating piece. A typical mortise and tenon joint has a square protrusion coming off the end of one piece that fits tightly into a square 'hole' or notch in the piece it's joined to. The pieces that make up the outer frame of a cabinet door might be joined using this technique.
Overlay - Overlay refers to the amount of face frame that is covered by the cabinet door or drawer front.
Partial overlay/Half Overlay - A cabinet design whereby the cabinet door or drawer front partially overlaps the face frame. When the drawers/doors are closed, more than ¼ inch of the face frame remains visible.
Particle board - a wood product made up of very small wood pieces and fragments that are fused together with a glue or resin under mechanical pressure.
Plywood - an all wood product made up of several layers of wood with the grain direction running at different angles with respect to each other. This orientation gives plywood greater strength and stability in comparison to solid wood. It reduces the tendency of wood to split when nailed at the edges and reduces expansion and shrinkage, providing improved dimensional stability.
Rail - the horizontal pieces of a face frame or door frame (in contrast to a "stile" which is the vertical member of the frame).
Raised Panel - Doors that have slightly raised center panels.
Recessed Panel - Door style where the center panel is inset or recessed. A common example is a Shaker door style.
Reveal - The exposed portion between the end of the cabinet face frame and the door.
Self Closing Drawers - Drawers that have mechanisms or magnets that guide the drawer closed. These are not soft-closing.
Sidemounted Glides - Drawer hardware that is mounted on the side of the drawer.
Slab Front - A flat door panel with no design, moldings, recessed or raised areas. Commonly gives a more contemporary appearance.
Soft Close Drawers - Drawers containing a piston that respond to various levels of pressure and weight, absorbing the impact and closing the door slowly and safely.
Stile - the vertical pieces of a face frame or door frame (in contrast to the "rails" which are the horizontal pieces of the frame).
Undermount Glides - Drawer hardware that is mounted underneath the drawer. Undermount guides can usually carry more weight than sidemount guides.
Veneer - thin layers of wood applied to plywood or MDF before it’s treated with stain. Veneers can be used on the sides of exposed cabinets (for example, on the end of a run of cabinets) and on the interior surfaces of cabinet boxes.
Assembly
Cabinets Dimensions
W0930-BP 9" Wide | 30" High | 12" Deep
W1230-BP 12" Wide | 30" High | 12" Deep
W1530-BP 15" Wide | 30" High | 12" Deep
W1830-BP 18" Wide | 30" High | 12" Deep
W2130-BP 21" Wide | 30" High | 12" Deep
W2430-BP 24" Wide | 30" High | 12" Deep
W2730-BP 27" Wide | 30" High | 12" Deep
W3030-BP 30" Wide | 30" High | 12" Deep
W3330-BP 33" Wide | 30" High | 12" Deep
W3630-BP 36" Wide | 30" High | 12" Deep
WBC2730-BP 27" Wide | 30" High | 12" Deep
WDC2430-BP 24" Wide | 30" High | 12" Deep
W3012-BP 30" Wide | 12" High | 12" Deep
W3312-BP 33" Wide | 12" High | 12" Deep
W3612-BP 36" Wide | 12" High | 12" Deep
W2415-BP 24" Wide | 15" High | 12" Deep
W3015-BP 30" Wide | 15" High | 12" Deep
W3315-BP 33" Wide | 15" High | 12" Deep
W3615-BP 36" Wide | 15" High | 12" Deep
W2418-BP 24" Wide | 18" High | 12" Deep
W3018-BP 30" Wide | 18" High | 12" Deep
W3318-BP 33" Wide | 18" High | 12" Deep
W3618-BP 36" Wide | 18" High | 12" Deep
W2424-BP 24" Wide | 24" High | 12" Deep
W3024-BP 30" Wide | 24" High | 12" Deep
W3624-BP 36" Wide | 24" High | 12" Deep
W331224-BP 33" Wide | 12" High | 24" Deep
W361224-BP 36" Wide | 12" High | 24" Deep
W331524-BP 33" Wide | 15" High | 24" Deep
W361524-BP 36" Wide | 15" High | 24" Deep
W361824-BP 36" Wide | 18" High | 24" Deep
W332424-BP 33" Wide | 24" High | 24" Deep
W362424-BP 36" Wide | 24" High | 24" Deep
W0936-BP 9" Wide | 36" High | 12" Deep
W1236-BP 12" Wide | 36" High | 12" Deep
W1536-BP 15" Wide | 36" High | 12" Deep
W1836-BP 18" Wide | 36" High | 12" Deep
W2136-BP 21" Wide | 36" High | 12" Deep
W2436-BP 24" Wide | 36" High | 12" Deep
W2736-BP 27" Wide | 36" High | 12" Deep
W3036-BP 30" Wide | 36" High | 12" Deep
W3336-BP 33" Wide | 36" High | 12" Deep
W3636-BP 36" Wide | 36" High | 12" Deep
WDC2436-BP 24" Wide | 36" High | 12" Deep
W0942-BP 9" Wide | 42" High | 12" Deep
W1242-BP 12" Wide | 42" High | 12" Deep
W1542-BP 15" Wide | 42" High | 12" Deep
W1842-BP 18" Wide | 42" High | 12" Deep
W2142-BP 21" Wide | 42" High | 12" Deep
W2442-BP 24" Wide | 42" High | 12" Deep
W2742-BP 27" Wide | 42" High | 12" Deep
W3042-BP 30" Wide | 42" High | 12" Deep
W3342-BP 33" Wide | 42" High | 12" Deep
W3642-BP 36" Wide | 42" High | 12" Deep
WDC2442-BP 24" Wide | 42" High | 12" Deep
WDC2742-BP 27" Wide | 42" High | 12" Deep
B09-BP (Full Height) 9" Wide | 34.5" High | 24" Deep
B12-BP 12" Wide | 34.5" High | 24" Deep
B15-BP 15" Wide | 34.5" High | 24" Deep
B18-BP 18" Wide | 34.5" High | 24" Deep
B21-BP 21" Wide | 34.5" High | 24" Deep
B24-BP 24" Wide | 34.5" High | 24" Deep
B27-BP 27" Wide | 34.5" High | 24" Deep
B30-BP 30" Wide | 34.5" High | 24" Deep
B33-BP 33" Wide | 34.5" High | 24" Deep
B36-BP 36" Wide | 34.5" High | 24" Deep
BBC42-45-BP 36" Wide | 34.5" High | 24" Deep
DB15-BP (3 Drawers) 15" Wide | 34.5" High | 24" Deep
DB18-BP (3 Drawers) 18" Wide | 34.5" High | 24" Deep
DB21-BP (3 Drawers) 21" Wide | 34.5" High | 24" Deep
DB24-BP 24" Wide | 34.5" High | 24" Deep
DB30-BP (3 Drawers) 30" Wide | 34.5" High | 24" Deep
DCB3612-BP (Turn Tables) 36" Wide | 34.5" High | 24" Deep
BC24-BP 24" Wide | 34.5" High | 24" Deep
SB30-BP 30" Wide | 34.5" High | 24" Deep
SB33-BP 33" Wide | 34.5" High | 24" Deep
SB36-BP 36" Wide | 34.5" High | 24" Deep
SB42-BP 42" Wide | 34.5" High | 24" Deep
SB60-BP 60" Wide | 34.5" High | 24" Deep
WP1884-BP 18" Wide | 84" High | 24" Deep
WP2484-BP 24" Wide | 84" High | 24" Deep
WP1890-BP 18" Wide | 90" High | 24" Deep
WP2490-BP 24" Wide | 90" High | 24" Deep
WP1896-BP 18" Wide | 96" High | 24" Deep
WP2496-BP 24" Wide | 96" High | 24" Deep
OU332484-BP 33" Wide | 84" High | 24" Deep
OU332490-BP 33" Wide | 90" High | 24" Deep
Accessories  
TK8-BP (Toekick)  (6/Box) 96" Wide | 4.5" High |  -
CM8-BP (Crown Moulding)  (6/Box) 96" Wide |  - | -
LRM7-BP (Light Rail)  (10/Box) 84" Wide |  - |  -
OSC7-BP (Outside Corner Moulding)  (10/Box) 84" Wide |  - |  -
SCM7-BP (Scribe Moulding)  (10/Box) 84" Wide |  - |  -
VA48-BP  (6/Box) 48" Wide | 3" High |  -
VAS48-BP  (6/Box) 48" Wide | 5" High |  -
F330-BP (Wall Filler)  (6/Box) 3" Wide | 30" High | .625" Deep
F342-BP (Wall Filler)  (6/Box) 3" Wide | 42" High | .625" Deep
F384-BP (Wall Filler)  (6/Box) 3" Wide | 84" High | .625" Deep
F396-BP (Wall Filler)  (6/Box) 3" Wide | 96" High | .625" Deep
F642-BP (Wall Filler)  (6/Box) 6" Wide | 42" High | .625" Deep
BF3-BP (Base Filler)  (6/Box) 3" Wide | 34.5" High | .625" Deep
BEP3L-BP (Dishwasher Panel) (1 Per Pack)  3" Wide | 34.5" High | .5" Deep
End Panel 24x35x3/16" Thick-BP (1 Per Pack)  24" Wide | 35" High | .1875" Deep
Wall End Panel 12x42x3/16" Thick-BP (1 Per Pack)  12" Wide | 42" High | .1875" Deep
Island Panel 3'x4'x1/4"-BP (1 Per Pack)  36" Wide | 48" High | .25" Deep
RP84 Refrigerator Panel-BP (1 Per Pack)  24" Wide | 84" High | 1.5" Deep
RP90 Refrigerator Panel-BP (1 Per Pack)  24" Wide | 90" High | 1.5" Deep
RP96 Refrigerator Panel-BP (1 Per Pack)  24" Wide | 96" High | 1.5" Deep
MC3018-BP 30" Wide | 18" High | 12" Deep
PR3015 Plate Rack-BP 30" Wide | 15" High | 12" Deep
WR3015 Wine Rack-BP 30" Wide | 15" High | 12" Deep
SGH30-BP (Stem Glass Holder) 30" Wide |  - | 12" Deep
1530 Mullion Door-BP (1 Per Pack)  15" Wide | 30" High | 12" Deep
1830 Mullion Door-BP (1 Per Pack)  18" Wide | 30" High | 12" Deep
3030 Mullion Door-BP (2 Per Pack)  30" Wide | 30" High | 12" Deep
3630 Mulliion Door-BP (2 Per Pack)  36" Wide | 30" High | 12" Deep
DC2430 Mullion Door-BP (1 Per Pack)  24" Wide | 30" High | 12" Deep
1536 Mulliion Door-BP (1 Per Pack)  15" Wide | 36" High | 12" Deep
1836 Mullion Door-BP (1 Per Pack)  18" Wide | 36" High | 12" Deep
3036 Mullion Door-BP (2 Per Pack)  30" Wide | 36" High | 12" Deep
3636 Mullion Door - BP (2 Per Pack)  36" Wide | 36" High | 12" Deep
DC2436 Mullion Door-BP (1 Per Pack)  24" Wide | 36" High | 12" Deep
1542 Mullion Door-BP (1 Per Pack)  15" Wide | 42" High | 12" Deep
1842 Mullion Door-BP (1 Per Pack)  18" Wide | 42" High | 12" Deep
3042 Mullion Door-BP (2 Per Pack)  30" Wide | 42" High | 12" Deep
3642 Mullion Door-BP (2 Per Pack)  36" Wide | 42" High | 12" Deep
DC2442 Mullion Door-BP (1 Per Pack)  24" Wide | 42" High | 12" Deep
DC2742 Mullion Door-BP (1 Per Pack)  27" Wide | 42" High | 12" Deep
CSF36-BP 36" Wide | 34.5" High | -
30DD - 30" Deco Door-BP (1 Per Pack)  12" Wide | 30" High | -
36DD - 36" Deco Door-BP (1 Per Pack)  12" Wide | 36" High | -
42DD - 42" Deco Door-BP (1 Per Pack)  12" Wide | 42" High | -
BDD-Base Full Height Deco Door-BP (1 Per Pack)  24" Wide | 30" High | -
TABLE POST 3" X 3" X 34 1/2" -IJS  
CSF Floor-NM (Natural Maple Only)  
RD18-NM  (Natural Maple Only) 4/Box  
RD24-NM (Natural Maple Only) - 4/Box  
SRI-NM (Spice Rack Insert-Nat.Maple)  
Vanities   
V2421BP - 2 Door  
V3021BP - 2 Door  
VDB1221BP  
V3021DBP - Drawers on right  
V3621DBP - Drawers on right  
V4821DBP  
V6021DBP  
L781821BP  
BV2126BP  
Close

What is 10x10 Pricing?

A 10x10 kitchen is a standard kitchen in size, it is a total of 20 feet of wall space. 10x10 pricing is a common method used by kitchen cabinet retailers to help customers gauge which cabinets cost less and which cost more. The cabinets used in our 10x10 pricing are the least expensive options for each finish as this is to be used as a starting point to what you would get if your kitchen was 10x10 and you used the least expensive options available in that particular finish.

For more information please click here.