Need help? Call us: 877-992-2246
Free KitchenDesign
CLOSE

Registration

Profile Information

Login Data

 
First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

Roosevelt Mocha with Black Accent (Semi-Custom)
Pre-Assembled Kitchen Cabinets

CARB2

CARB stands for California Air Resources Board, also known as Air Resources Board (ARB). It is a department of the California Environmental Protection Agency. It was established in 1967 with the purpose of maintaining and improving air quality, and researching causes and solutions of air pollution. CARB's mandates, such as CARB 2 compliant MDF, are strict and usually are considered the standard across the United States.

What is CARB Phase 2 Compliant?

CARB Phase 1 and Phase 2 are a part of California's Composite Wood Products Regulation (CWP Regulation), which took effect in 2009 with Phase 1. The regulation has to do with reducing formaldehyde emissions from composite wood products, hardwood plywood, particleboard and medium density fiberboard (MDF). In the 2009 rollout of the CARB's Airborne Toxic Control Measure (ATCM), formaldehyde emissions were capped at .08 parts per million (ppm). CARB Phase 2 went into effect in 2010 and has much lower formaldehyde emissions than the previous phase; set at .05 ppm. A main reason why the CARB ATCM is the strictest air quality measure is because it CAPS emissions levels. Other air quality standards are averages.

KCMA

The Kitchen Cabinet Manufacturers Association Certification Program assures the specifier or user of kitchen cabinets and bath vanities that the cabinet bearing the blue and white seal complies with the rigorous standards set by the American National Standards Institute (ANSI) and sponsored by the Kitchen Cabinet Manufacturers Association (KCMA).

5 reasons why certified cabinetry a must for today's performance-conscious homeowner:

KCMA's rigorous, in-laboratory compliance program measures the integrity of your cabinetry through five tests. These tests evaluate cabinet structure, door and drawer operation, and the cabinetry finish, making certain each feature complies with the nationally recognized standards developed by KCMA. In today's competitive homebuilding industry, the KCMA cabinetry standards are well respected and serve as a best-in-class benchmark for cabinet manufacturers.

  1. Weight Tests: For seven days, in a laboratory environment, cabinet shelves and bottoms are loaded with 15 pounds of weight per square foot. Technicians monitor the cabinetry for signs of joint separation or other failures of the cabinets or their mounting systems. Other weight tests include gradually loading 500 pounds into mounted cabinets, simulating the stress on a heavily loaded cabinet, and dropping a three-pound steel ball onto cabinet bottoms from six inches above the surface, replicating dropped cans.
  2. Slide Tests: Few families will open and close cabinets as frequently - or as vigorously - as they are during KCMA certification testing. But that's the point. After the KCMA slides cabinets for 25,000 cycles, while they hold 15 pounds per square foot, you know your KCMA-certified cabinetry will keep pace with your active lifestyle.
  3. Swing Tests: How do you avoid the shoddy look of loose or unaligned cabinet doors that often occurs over time? You buy certified cabinets. During two separate tests - focusing on the cabinet doors and hinges-the KCMA test their ability to withstand 65 pounds of weight and 25,000 swing cycles. KCMA-certified cabinetry continues to operate flawlessly with no signs of damage or looseness.
  4. Spill Tests: Because the finish of your cabinetry is one of its most visible features, the KCMA test it to make certain it's manufactured to withstand potentially abrasive substances. KCMA exposes cabinetry to such stain threats as vinegar, grape juice, coffee, alcohol, and even mustard for varying amounts of time. The result? Cabinets that earn the KCMA certification seal show no discoloration that can't easily be polished away.
  5. Heat Tests: After sweltering in a humid, 120-degree hotbox for 24 hours, how do KCMA-certified cabinets respond? Beautifully. With no discoloration or blistering, your certified cabinets prove they can handle the inevitable temperature hazards in your kitchen.

Roosevelt%252520Mocha%252520with%252520Black%252520Accent

Specs
Shipping Time: Ships in 5-7 weeks
Style: Raised Panel
Face Frame: 1-1/2" Solid Maple
Door Frame: Solid Maple
Door Center: Solid Maple
Sides: 1/2" plywood
Top & Bottom (Wall): 1/2" plywood
Bottom (Base): 1/2" plywood
Back Panel: 1/2" plywood
Shelves: 3/4" Veneered, Edgebanded, Adjustable Shelves
Base Cabinet Shelf Depth: 15-3/4"
Drawer Box: 5/8" Solid Hardwood Dovetailed Drawer Box, 1/4" Plywood Bottom
Drawer Glides: Undermount, Soft Close, Full Extension Glides, 100 lbs capacaity per drawer
Base Corner Supports: I-beam Construction
Overlay: Full
Hinges: 6-Way Adjustable, Concealed, Opens 110⁰
Cabinet Interior: Natural Finish
Center Stile:

Center Stile on Cabinets over 36"

Assembly Method: Ships Pre-Assembled - Nail & Glue
Finish: Sherwin Williams finish/paint, cabinet interior also has a UV finish to help protect against moisture
Toe Kick: 1/2" Plywood - Unfinished, Requires TK96 to Finish Toe Kick Area
Installation Rail: 1/2" Plywood
CARB Compliant: Yes
Door Hinges: Hinged To The Right By Default. Please Use Drop Down Options For Each Cabinet To Change Hinging From Right To Left
Finishes Side Panels Finished: No
Installation/Designer Note: Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards*
About

This finish ships in 5-7 weeks


Accident Protection Warranty For Your Entire Kitchen! Learn More!


Looking for a timeless look to really stand out in your kitchen? Choose the Roosevelt Mocha with Black Accent collection; with its rich finish and black accenting, the beauty of these cabinets will enhance any home. All plywood box construction also ensures these cabinets will stand the test of time and provide a usable space for years to come.

Cabinet Terms
Still have questions? Email us at info@thertastore.com today!
Ball Bearing Glides - Smooth gliding guides that are usually side mounted. These guides slide on small metallic balls that bear the weight of the drawer.
Butt Doors - Door on a double door cabinet that when closed, nearly touch each other. Typically, a 1/8" gap is allowed between the butt doors.
Cam Locks - A cylindrical lock or fastener commonly used for cabinets. Often there will be a male and female part. Once inserted, simply turn the metal piece 180 degrees clockwise to lock into place. Cam locks are an easy and secure way to connect cabinet panels. They are commonly found in ready-to-assemble cabinets.
Center Stile - Vertical strips of wood that divide cabinets for extra support and durability. Usually seen on larger width cabinets.
Concealed hinge - a hinge that is not visible on the front of a cabinet door. Concealed hinges are attached to the inside surface of the door.
Dado - a groove that is cut into a piece of material so that another piece may slide into it. The inside surface of cabinet drawers may be 'dadoed' with a groove to accept the drawer bottom panel which helps make for a stronger joint between the drawer side and bottom panels.
Dovetail - Woodworked joints that are used to connect drawer sides to the drawer face without the use of exposed hardware. These joints are known for their durability. The wood is cut in a series of angled portions that look like dove tails. These “tails” interlock and are difficult to separate once attached.
Epoxy Coated Glides - A fast drying white protective coating that is baked into hardware metal guides. It is low VOC and can be used for sidemount and undermount hardware.
Exposed hinge - a hinge type that is visible on the outside edge of the cabinet door when the door is closed.
Face frame - the wood frame that is attached to the front edges of the top, bottom and sides of the cabinet box. The door gets hinged to the face frame. This frame helps provide rigidity to the box. Cabinet designs that incorporate this feature are called "framed" or "face-frame" cabinets.
Framed - a cabinet design that uses a 'face-frame' which is typically a wood frame attached to the front edges of the cabinet box (where the door gets hinged to).
Frameless - a cabinet design that does not use a frame on the front outside edges of the cabinet box. The front of the cabinet box is formed by the edges of the top, bottom and side panels of the cabinet box. The cabinet door typically covers these edges when closed.
Full Extension Glides - Hardware that provides full-access to drawers and allows the drawer to pass the face frame.
Full Overlay - A cabinet design whereby the cabinet door or drawer front covers the entire face frame so that only the cabinet door is seen with no part of the face frame visible. A cabinet is also considered full-overlay when the reveal is less than ¼ inch.
Half Overlay/Partial Overlay - A cabinet design whereby the cabinet door or drawer front partially overlaps the face frame. When the drawers/doors are closed, more than ¼ inch of the face frame remains visible.
Inset - a cabinet design whereby the doors fit inside of the face frame when closed (rather than overlapping and sitting on top of the face frame).
Medium density fiberboard (MDF) - a wood-based product that's produced by the combination of very small wood fibers and a glue, resin or similar bonding agent. MDF can be more easily shaped than products like particle board due to the consistency of the material formed by the small fibers. MDF can be used for shelves, doors (typically painted or covered with melamine) and other cabinet parts. It is very dense and resists warping. It is commonly seen in the center panels of recessed cabinet door styles (like a Shaker door) to prevent warping and cracking of the center panel during the wood’s natural expansion and contraction throughout the year.
Melamine - a durable plastic, similar to laminate that can be applied to certain areas of cabinets. It is easy to clean and resists stains, chipping and fading.
Miter - A woodworking joint where two beveled pieces adjoin to make a 90 degree angle.
Mortise and Tenon - a means of wood joinery that involves part of one piece being inserted into a notch or hole in the mating piece. A typical mortise and tenon joint has a square protrusion coming off the end of one piece that fits tightly into a square 'hole' or notch in the piece it's joined to. The pieces that make up the outer frame of a cabinet door might be joined using this technique.
Overlay - Overlay refers to the amount of face frame that is covered by the cabinet door or drawer front.
Partial overlay/Half Overlay - A cabinet design whereby the cabinet door or drawer front partially overlaps the face frame. When the drawers/doors are closed, more than ¼ inch of the face frame remains visible.
Particle board - a wood product made up of very small wood pieces and fragments that are fused together with a glue or resin under mechanical pressure.
Plywood - an all wood product made up of several layers of wood with the grain direction running at different angles with respect to each other. This orientation gives plywood greater strength and stability in comparison to solid wood. It reduces the tendency of wood to split when nailed at the edges and reduces expansion and shrinkage, providing improved dimensional stability.
Rail - the horizontal pieces of a face frame or door frame (in contrast to a "stile" which is the vertical member of the frame).
Raised Panel - Doors that have slightly raised center panels.
Recessed Panel - Door style where the center panel is inset or recessed. A common example is a Shaker door style.
Reveal - The exposed portion between the end of the cabinet face frame and the door.
Self Closing Drawers - Drawers that have mechanisms or magnets that guide the drawer closed. These are not soft-closing.
Sidemounted Glides - Drawer hardware that is mounted on the side of the drawer.
Slab Front - A flat door panel with no design, moldings, recessed or raised areas. Commonly gives a more contemporary appearance.
Soft Close Drawers - Drawers containing a piston that respond to various levels of pressure and weight, absorbing the impact and closing the door slowly and safely.
Stile - the vertical pieces of a face frame or door frame (in contrast to the "rails" which are the horizontal pieces of the frame).
Undermount Glides - Drawer hardware that is mounted underneath the drawer. Undermount guides can usually carry more weight than sidemount guides.
Veneer - thin layers of wood applied to plywood or MDF before it’s treated with stain. Veneers can be used on the sides of exposed cabinets (for example, on the end of a run of cabinets) and on the interior surfaces of cabinet boxes.
Assembly
Start Shopping

*If you have ordered this finish before, please contact us to ensure your new order matches what you currently have*

Wall
Cabinets
Base
Cabinets
Oven/Pantry
Cabinets
Cabinet
Accessories
Bathroom
Vanities
Storage
Accessories
FREE Professional Kitchen Design Service!

Let us turn your dream into a reality!

Cart Summary
Cart Summary Refresh
 
CLOSE

What is Basic Kitchen Pricing?

A Basic Kitchen is a standard kitchen in size, it is a total of 20 feet of wall space. Basic Kitchen pricing is a common method used by kitchen cabinet retailers to help customers gauge which cabinets cost less and which cost more. The cabinets used in our Basic Kitchen pricing are the least expensive options for each finish as this is to be used as a starting point to what you would get if your kitchen was a Basic Kitchen and you used the least expensive options available in that particular finish.

For more information please click here.