CARB stands for California Air Resources Board, also known as Air Resources Board (ARB). It is a department of the California Environmental Protection Agency. It was established in 1967 with the purpose of maintaining and improving air quality, and researching causes and solutions of air pollution. CARB's mandates, such as CARB 2 compliant MDF, are strict and usually are considered the standard across the United States.
What is CARB Phase 2 Compliant?
CARB Phase 1 and Phase 2 are a part of California's Composite Wood Products Regulation (CWP Regulation), which took effect in 2009 with Phase 1. The regulation has to do with reducing formaldehyde emissions from composite wood products, hardwood plywood, particleboard and medium density fiberboard (MDF). In the 2009 rollout of the CARB's Airborne Toxic Control Measure (ATCM), formaldehyde emissions were capped at .08 parts per million (ppm). CARB Phase 2 went into effect in 2010 and has much lower formaldehyde emissions than the previous phase; set at .05 ppm. A main reason why the CARB ATCM is the strictest air quality measure is because it CAPS emissions levels. Other air quality standards are averages.
Euro Gloss White
Ships in 3-10 business days
Accident Protection Warranty For Your Entire Kitchen! Learn More!
The Euro Gloss White frameless collection accomplishes an upgraded look and feel with its high-quality, full access cabinet boxes, drawer systems, and soft close hinges. The scratch resistant, high gloss white finish makes these cabinets the centerpiece of any room. Let your imagination run away with you and choose from a variety of specialty cabinets and accessories to really make your kitchen pop!
Shipping Time: | Ships in 3-10 business days |
Style: | Slab/Euro |
Face Frame: | Frameless |
Door: | Scratch resistant, high gloss, PET laminate with white melamine back |
Drawer Front: | Scratch resistant, high gloss, PET laminate with white melamine back |
Sides: | Plywood core with thermofused melamine MDF panels on either side |
Top & Bottom (Wall): | Plywood core with thermofused melamine MDF panels on either side |
Bottom (Base): | Plywood core with thermofused melamine MDF panels on either side |
Back Panel: | 1/4" MDF |
Shelves: | 18mm (.7") adjustable shelves w/edge banding, suction cup shelf clips, white/grey linen thermofused melamine |
Base Cabinet Shelf Depth: | Full |
Drawer Box: | Altamax drawer box, grey metal sides and grey plywood composite bottom and back panel |
Drawer Glides: | Undermount, full extension, soft close |
Base Corner Supports: | Top and back support rails |
Overlay: | Full |
Hinges: | Adjustable 110 degree, soft close hinges |
Cabinet Interior: | White/grey linen thermofused melamine |
Center Stile: |
None |
Assembly Method: | Pre-inserted wood dowel and quick screw assembly |
Finish: | PET laminate adhered with heat and glue using a melamine or laminate press |
Toe Kick: | Adjustable black leg support included with base cabinets, toe kick needs to be purchased separately |
Installation Rail: | Support rails in the same material as the cabinet box |
Wall Cabinet Bottoms Finished (Exterior): | Yes (will be the same color as the interior: white/grey linen melamine) |
CARB Compliant: | Yes |
Door Hinges: | Hinges are not pre-installed, they will ship in a separate box |
Toe Kicks Included w/Base Cabinets: | No, toe kicks will need to be ordered separately from the Cabinet Accessories tab |
Sides Panels Finished: | No, matching end panels need to be ordered separately for exposed sides (each end panel will add 3/4" width) |
Installation/Design Note: |
The cabinet depth measurement listed is the depth from the front of the cabinet box to the back of the cabinet and does not include the cabinet door depth. Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards* Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above. |
Please note that all cabinet images are to show the final product, but assembly will be required.
Please note that all cabinet images are to show the final product, but assembly will be required.
Please note that all cabinet images are to show the final product, but assembly will be required.
Please note that all cabinet images are to show the final product, but assembly will be required.