Alpine White Shaker Sample Door

In stock
SKU
Alpine-White-Sample-Door
$35.00 $24.50 ​ ​ Deposit
Add to My Saved Cart
Bread Checkout
 

 The specifications below are for the kitchen cabinet associated with this door sample

Sample Door Shipping Time: Samples ship out same day before 12pm Mon-Fri. After 12pm samples will ship out the next business day
Cabinetry Shipping Time:

Ships in 5 to 15 business days

 
Style: Shaker
Face Frame: 3/4" Solid birch
Door Frame: 3/4" Solid birch
Door Center: MDF (MDF is used to avoid cracking/warping)
Sides: 1/2" A-Grade plywood with wood veneer
Top & Bottom (Wall): 1/2" A-Grade plywood with wood veneer
Bottom (Base): 3/8" A-Grade plywood with wood veneer
Back Panel: 1/2" Full back
Shelves: 3/4 " A-Grade plywood with wood veneer
Base Cabinet Shelf Depth: 1/2
Drawer Box: Solid Wood 17mm (close to 3/4") sides, Drawer bottom 1/2" plywood, Drawer length 21". Dovetail construction, Natural finish.
Drawer Glides: Undermount, full extension with soft closing feature
Base Corner Supports: Metal corner brackets
Overlay: Full with butt doors
Hinges: Concealed 6-way adjustable with Soft Closing Feature
Cabinet Interior: Natural Finish
Center Stile:

No center stile on cabinetry 24"W to 36"W

Assembly Method: L-bracket
Finish: Polyurethane finish
Toe Kick: 1/2" Plywood (sides of the toe kicks will be unfinished)
Installation Rail: None (there is a full back)
Wall Cabinet Bottoms Finished (Exterior): Yes
CARB Compliant: Yes
Door Hinges: Hinged To The Right By Default. For Wall Cabinets The Face Frame Can Be Flipped. For Base Cabinets Unhinge The Door, Flip It, Screw Holes On The Opposite Side To Re-Hinge, And Then Fill The Original Holes (Touch Up Kit Can Be Purchased For This)
Toe Kicks Included w/Base Cabinets: Yes
Sides Panels Finished: Yes
Installation/Designer Note:

The full-overlay door style leaves roughly a 1/4" clearance on the edge. If installed directly against a wall or deeper cabinet and a cabinet door opening of at least 90 degrees is desired, scribe molding should be installed between the cabinet and the wall (or deeper cabinet). If not, the door may not be able to open a full 90 degrees. For a full opening, a space of at least 1/4-1/2" is necessary, a larger space may be needed depending on the decorative hardware used on the cabinets.

The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth.

Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards*

Schematic images are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above.

Additional Information
SKU Alpine-White-Sample-Door

Registered Customer

If you have an account with us, log in using your email address.