Phoenix Cream Glaze Sample Door
The creamy-white raised center door panels of the Phoenix Cream Glaze collection offers a traditional yet fresh addition to any space. These cabinets are all about quality with soft close, full extension drawer glides, and plywood box construction. Pair with the Phoenix Caramel Glaze collection to add dimension and a pop of color for a stand-out kitchen!
Sample Door Shipping Time: | Samples ship out same day before 12pm Mon-Fri. After 12pm samples will ship out the next business day |
Cabinetry Shipping Time: |
Ships in 10 to 20 business days |
Style: | Raised |
Face Frame: | 3/4" x 1-1/2" solid wood |
Door Frame: | Solid maple |
Door Center: | MDF |
Sides: | 1/2" plywood |
Top & Bottom (Wall): | 1/2" plywood |
Bottom (Base): | 1/2" plywood |
Back Panel: | 3" wide x 3/4" thick picture frame back with 1/4" plywood center |
Shelves: | 3/4" plywood, adjustable, metal shelf rests |
Base Cabinet Shelf Depth: | 18" |
Drawer Front: | 5-piece |
Drawer Box: | Dovetail drawer boxes, 1/2" thick solid wood side panels |
Drawer Glides: | Full extension, soft closing, undermount glides |
Base Corner Supports: | Metal bracket reinforced corners |
Overlay: | Full |
Hinges: | Soft-close |
Cabinet Interior: | Clear coated natural maple interior |
Center Stile: |
None |
Assembly Method: | Screw, glue & staple assembly |
Finish: | Polyurethane UV Resistant Finish w/Glaze |
Toe Kick: | 1/2" thick, edge banded |
Installation Rail: | 3/4" thick x 1-1/2" wide |
CARB Compliant: | Yes |
Door Hinges: | Doors can be flipped for a left or right assembly |
Side Panels Finished: | Yes |
Installation/Design Note: |
Scribe needs to be used for a wall cabinet against a wall or deeper cabinet/appliance. For base cabinets, a 1/2" space needs to be left (which can be filled with a filler that is cut to size).
The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth.
Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards*
|
SKU | Phoenix-Cream-Glaze-Sample-Door |
---|