Let us turn your dream into a reality!
CARB stands for California Air Resources Board, also known as Air Resources Board (ARB). It is a department of the California Environmental Protection Agency. It was established in 1967 with the purpose of maintaining and improving air quality, and researching causes and solutions of air pollution. CARB's mandates, such as CARB 2 compliant MDF, are strict and usually are considered the standard across the United States.
What is CARB Phase 2 Compliant?
CARB Phase 1 and Phase 2 are a part of California's Composite Wood Products Regulation (CWP Regulation), which took effect in 2009 with Phase 1. The regulation has to do with reducing formaldehyde emissions from composite wood products, hardwood plywood, particleboard and medium density fiberboard (MDF). In the 2009 rollout of the CARB's Airborne Toxic Control Measure (ATCM), formaldehyde emissions were capped at .08 parts per million (ppm). CARB Phase 2 went into effect in 2010 and has much lower formaldehyde emissions than the previous phase; set at .05 ppm. A main reason why the CARB ATCM is the strictest air quality measure is because it CAPS emissions levels. Other air quality standards are averages.
Legacy Outdoor Black
Ships in 1-4 weeks
Whether for your deck or patio or even your garage, the Legacy Outdoor Black cabinets can hold whatever items you choose safely for years to come. All doors and drawers are sealed with an EPDM D-Seal to ensure a weather resistant interior. The sleek black finish pairs well with any dcor, in all spaces!
|Shipping Time:||Ships in 1-4 weeks|
|Style:||Inset slab/flat panel|
|Face Frame:||All aluminum, welded assembly featuring inset face frames and weather resistant powder coating|
|Door Center:||Flat door style with matching powder coated exterior and a painted black aluminum panel on the back of the door|
|Cabinet Box::||Seamless, one-piece side and back panel (.040 mill finish aluminum) bent for strength, the cabinet box depth is 28" (not including decorative pulls)|
|Bottom (Base):||Sturdy aluminum floor: one-piece fabricated (.060 mill finish aluminum) panel assembly|
|Back Panel:||Matching finish back panels (sold separately) install on exposed cabinet backs to create a freestanding application. Solid construction and ventilated for grill applications are available.|
|Base Cabinet Shelf Depth:||Full-depth|
|Drawer Front:||Inset drawer front|
|Drawer Box:||24" deep, aluminum, powder coat black finish drawer box with an EPDM D-seal around frame to insure a weather and pest resistant seal|
|Drawer Glides:||100lb full extension, soft close, side mount ball bearing glides|
|Sealed Storage:||All doors and drawers are sealed with an EPDM D-Seal to insure a weather resistant interior|
|Hinges:||110 degree concealed hinge with 6-way adjustability|
|Cabinet Interior:||Milled aluminum (silver/gray in color)|
|Center Stile:|| |
Double door cabinets will have a center stile to ensure a tight seal
|Assembly Method:||Durable aluminum construction (arrives pre-assembled)|
|Finish:||Power-coated finish: coated with a super-durable, architectural grade polyester powder coating, featuring high quality exterior grade pigments, providing weathering properties that follow AAMA 2604 requirements.|
|Legs:||Adjustable stainless steel legs on all freestanding cabinets (toe kicks not included or required but are an optional add on)|
|Installation Note:||The doors are inset, and open within their own space, if a door is opening towards a wall or object the handle will hit when opening beyond 90 degrees, they are 110 degree hinges|
|Side Panels Finished:||Side panels are not finished by default, finished back and side panels are not included with the cabinets and must be purchased separately if needed; unless otherwise noted|
|Installation/Design Note:||The cabinet depth measurement listed is the depth from the front to the back of the cabinet and does not include the decorative hardware depth. Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards* Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above.|