Price Match Guarantee
Up To 15 Days After Purchase
Ships: 5-15 business days
CARB stands for California Air Resources Board, also known as Air Resources Board (ARB). It is a department of the California Environmental Protection Agency. It was established in 1967 with the purpose of maintaining and improving air quality, and researching causes and solutions of air pollution. CARB's mandates, such as CARB 2 compliant MDF, are strict and usually are considered the standard across the United States.
What is CARB Phase 2 Compliant?
CARB Phase 1 and Phase 2 are a part of California's Composite Wood Products Regulation (CWP Regulation), which took effect in 2009 with Phase 1. The regulation has to do with reducing formaldehyde emissions from composite wood products, hardwood plywood, particleboard and medium density fiberboard (MDF). In the 2009 rollout of the CARB's Airborne Toxic Control Measure (ATCM), formaldehyde emissions were capped at .08 parts per million (ppm). CARB Phase 2 went into effect in 2010 and has much lower formaldehyde emissions than the previous phase; set at .05 ppm. A main reason why the CARB ATCM is the strictest air quality measure is because it CAPS emissions levels. Other air quality standards are averages.
Asheville Rift Oak Shaker
Product Overview
Ships in 5-15 Business Days
Accident Protection Warranty For Your Entire Kitchen! Learn More!
The Asheville Rift Oak Shaker collection offers a minimalist and polished look, with an updated slim shaker door style that features clean lines. It's a classic shaker style that's been re-imagined for modern spaces. This unique collection features panels that are meticulously selected and then rift cut to accentuate the linear grain prevalent in the wood. Modern, natural and warm, the Asheville Rift Oak Shaker cabinets are the epitome of luxury.
Specifications
This finish is available in both Ready to Assemble and Pre-Assembled
| Shipping Time: |
Ships in 5-15 Business Days |
| Matching Collections: |
   |
| Style: | Shaker |
| Face Frame: | 3/4" solid wood |
| Door Frame: | 7/8" solid Rift White Oak, wire-brushed for texture, warmth and clarity |
| Door Center: | MDF (MDF is used to avoid cracking/warping), wire-brushed for texture, warmth and clarity |
| Door Frame Width: | 2.5" |
| Sides: | 1/2" veneered plywood with UV finish |
| Top & Bottom (Wall): | 1/2" veneered plywood with UV finish |
| Bottom (Base): | 1/2" veneered plywood with UV finish |
| Back Panel: | 1/2" veneered plywood with UV finish |
| Shelves: | 3/4" veneered plywood, adjustable with UV finish, stainless steel shelf clips |
| Base Cabinet Shelf Depth: | Full depth |
| Drawer Box: | 3/4" solid wood, dovetailed drawer box with 5-piece solid wood drawer front frame and MDF center panel |
| Drawer Glides: | Undermount, full extension, soft close glides, rated up to 50lbs (including the roll outs) |
| Base Corner Supports: | Wood corner supports and 1/4" plywood I-beams |
| Overlay: | Full |
| Hinges: | Concealed 6-way adjustable soft closing hinges |
| Cabinet Interior: | Natural finish |
| Center Stile: |
None |
| Assembly Method: | Nail/screw/glue |
| Finish: | Hand sprayed, oven baked with a catalyzed conversion varnish top coat to promote durability and allow for easy cleaning |
| Toe Kick: | 1/2" matching veneered plywood toe kick (highly recommended to use 8' toe kick pieces) |
| Installation Rail: | No installation rail due to full 1/2" back |
| Wall Cabinet Bottoms Finished (Exterior): | Natural, bottom edges of side panels are unfinished |
| CARB Compliant: | Yes |
| Door Hinges: | Wall cabinet doors can be flipped for L or R hinge orientation, base cabinets have pilot holes on L and R |
| Toe Kicks Included w/Base Cabinets: | Yes, but highly recommended to use 8' toe kick pieces |
| Sides Panels Finished: | No, finished side(s) must be specified from options menu for each sku (except 24" deep wall cabinets, glass wall cabinets, wall open cabinets, microwave wall cabinets, wine cabintes, hoods, pantries, oven and vanity cabinets, which all come with pre-finished sides). |
| Installation/Designer Note: |
The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards* Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specificationsforthis collection can be found in theconstruction detailslisted above. |
Assembly
How to Install Molding
Assembly Videos:
Base Corner Cabinet with Lazy Susan
Wall Cabinet Instructions:
W301824 - W361824 Wall Cabinets
Base Cabinet Instructions:
Base Cabinet Instructions Continued:
Base Microwave Cabinet
Drawer Base Cabinet
Base Pantry Pullout Cabinet
Roll Out Trays Instructions:
Oven Cabinet Instructions:
Pantry Cabinet Instructions:
Bathroom Vanity Instructions:
24x21 - 30x21 Vanity Sink Base Cabinets
30x12 - 36x21 Vanity Drawer/Door Combo Cabinets
48x21 - 60x21 Vanity Drawer/Door Combo Cabinets
Accessories:
Undermount Glides
Wall Cabinets
Base Cabinets
Oven/Pantry Cabinets
Cabinet Accessories
Bathroom Vanities
Storage Accessories
-
View All
-
Sample Door
-
30" High Wall Cabinets
-
36" High Wall Cabinets
-
42" High Wall Cabinets
-
12" Deep Small Wall Cabinets
-
24" Deep Small Wall Cabinets
-
15" High Glass Door Cabinets
-
Corner and Blind Wall Cabinets
-
Wall Angle Cabinets
-
Wall Specialty Cabinets
-
Hoods
-
30”, 36” and 42” High Glass Door Cabinets
-
Wall Open Cabinet
Please note that all cabinet images are to show the final product, but assembly will be required.