CARB stands for California Air Resources Board, also known as Air Resources Board (ARB). It is a department of the California Environmental Protection Agency. It was established in 1967 with the purpose of maintaining and improving air quality, and researching causes and solutions of air pollution. CARB's mandates, such as CARB 2 compliant MDF, are strict and usually are considered the standard across the United States.
What is CARB Phase 2 Compliant?
CARB Phase 1 and Phase 2 are a part of California's Composite Wood Products Regulation (CWP Regulation), which took effect in 2009 with Phase 1. The regulation has to do with reducing formaldehyde emissions from composite wood products, hardwood plywood, particleboard and medium density fiberboard (MDF). In the 2009 rollout of the CARB's Airborne Toxic Control Measure (ATCM), formaldehyde emissions were capped at .08 parts per million (ppm). CARB Phase 2 went into effect in 2010 and has much lower formaldehyde emissions than the previous phase; set at .05 ppm. A main reason why the CARB ATCM is the strictest air quality measure is because it CAPS emissions levels. Other air quality standards are averages.
Stone Shaker - Quick Ship
Ships in 3-7 business days
Accident Protection Warranty For Your Entire Kitchen! Learn More!
The Stone Shaker collection is the perfect way to brighten up your kitchen. The soft grey color pairs perfectly with the Brilliant White Shaker so feel free to coordinate with an island and really make your kitchen the focal point of your home. Quality will never be a concern with an all plywood box, and soft close drawers and doors. Â
Shipping Time: | Part of our Quick Ship program - ships in 3 to 7 business days |
Matching Collections: | |
Style: | Shaker |
Face Frame: | 3/4" x 1-3/4" Birch |
Door Frame: | 3/4" HDF (HDF is used to avoid cracking/warping) |
Door Center: | HDF (HDF is used to avoid cracking/warping) |
Door Frame Width: | 2.75" |
Center Panel Beveled Edge: | Yes |
Sides: | 1/2"A-Grade Plywood |
Top & Bottom (Wall): | 1/2"A-Grade Plywood |
Bottom (Base): | 1/2"A-Grade Plywood |
Back Panel: | 1/2"A-Grade Plywood Full Back |
Shelves: | Adjustable 3/4" w/Front Edge Banding |
Base Cabinet Shelf Depth: | 1/2 |
Drawer Box: | 5/8" solid hardwood, dovetailed drawer box, 5/16" Plywood Drawer Box Bottom, 5-Piece drawer front construction |
Drawer Glides: | Undermount, Full Extension, Soft Close Glides |
Base Corner Supports: | 3/4" Solid Wood Corner Blocks |
Overlay: | Full |
Hinges: | 6-way Adjustable, Concealed, European Soft Close Hinges |
Cabinet Interior: | UV Coated Natural Interior(Prepped-for-glass cabinets will be finished to match the cabinet fronts) |
Center Stile: |
None (unless listed in the cabinet description) |
Assembly Method: | Metal Clip or Glue & Staple: Cabinets come with Metal Clips (Cleats - not already installed on the cabinets) that can be used to assemble or the cabinets can be Glued and Stapled. If Staple & Glued, clips will not be used |
Finish: | 7 step, acid-catalyzed finish process with a UV coating |
Toe Kick: | 1/2" Plywood |
Installation Rail: | None |
Wall Cabinet Bottoms Finished (Exterior): | Yes (just bottom panel, edges of side and back panel and recessed area is unfinished) |
CARB Compliant: | Yes |
Door Hinges: | Doors come pre-drilled for the hinges, the face frame has marks where to drill and the customer chooses Right or Left during assembly. |
Toe Kicks Included w/Base Cabinets: | Yes, but there will be a small gap when two cabinets are side by side, so the TKC (8' toe kick) is needed if cabinets are next to each other. |
Sides Panels Finished: | Yes |
Installation/Design Note: |
The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards* Schematic imagesand renderings are generic and may not represent exact construction details for each collection. The exact specificationsforthis collection can be found in theconstruction detailslisted above. |
-
View All
-
Sample Door
-
30" High Single Door Wall Cabinets
-
30" High Double Door Wall Cabinets
-
36" High Single Door Wall Cabinets
-
36" High Double Door Wall Cabinets
-
42" High Single Door Wall Cabinets
-
42" High Double Door Wall Cabinets
-
Corner and Blind Wall Cabinets
-
30”, 36” and 42” High Glass Door Cabinets
-
12", 15" and 18" High Glass Door Cabinets
-
12" Deep Small Wall Cabinets
-
24" Deep Small Wall Cabinets
-
Wall Open and Angle Cabinets
-
Wine, Glass and Plate Rack Cabinets
-
Hoods
-
Wall Cabinet Hanging Kits
Please note that all cabinet images are to show the final product, but assembly will be required.